(не работает) новый радар pubg 20.03.18 (не работает)

Что по банам?

 

Объясни как установить

 

Если через 1 пк запускать не через виртуалку бан прилетит?

 

Установка?

 

Работает ,и как по установке?И банам.??

 

прилетит

 

Банов нету пока-что, да и если через виртуалку то и не прилетит.
Лень было переписывать на русский, надеюсь вы поймете ))

VM

1. Install Virtual Box
2. Install Virtual Box Extension Pack ( https://download.virtualbox.org/vir...lBox_Extension_Pack-5.2.6-120293.vbox-extpack )
3. Install Windows 7 x64 (64 bit) (!!!NOT Windows 10!!!) on the VM (recommended: 2gb ram, 16gb storage, 2 processors) Recommended: https://softlay.net/operating-system/windows-7-all-in-one-iso-free-download-32-64-bit.html Use Windows 7 ultimate when installing
4. Install https://www.winpcap.org/install/ and https://www.microsoft.com/en-us/download/details.aspx?id=48145 on the VM
5. Install .Net framework 4.5: https://www.microsoft.com/en-us/download/details.aspx?id=30653
6. Go to settings of your VM, go to network, set attached to: 'Bridged adapter' and set promiscuous mode: 'Allow all'
7. Go to settings of your VM, go to video, set video memory to max and enable both acceleration checkboxes.
8. Run radar on VM.

No need to set up *** using this method!
If you have OpenGL error try this:

1. Press windows + r
2. Type in msconfig and press enter
3. Go to 'boot' and check 'safe boot'
4. Apply/ok and restart VM (it will boot in safe mode)
5. Go to VirtualBox toolbar and go to Devices -> Insert Guest Additions CD image... https://linuxclub.cs.byu.edu/downlo...rtualbox/5.1.30/VBoxGuestAdditions_5.1.30.iso
6. Press Windows + E and open the CD drive for guest additions
7. Install, select Direct3D support when installing! Do not reboot after installation.
8. Go to msconfig, boot, disable safe boot and restart to normal windows

2nd PC
Download: https://www.winpcap.org/install/

This is for PC/VM where your radar runs.

1. Go to command prompt (CMD)
2. Type "ipconfig"
3. Write your IPv4 address and default gateway down
4. Use windows seacrh and look for ncpa.cpl
5. Go to your internet adapter properties and then IPv4 properties and then check "Obtain an IP address automatically" and also "Obtain DNS server address automatically"
6. Uncheck IPv6 and then just press OK
7. Then go back to ncpa.cpl (should already be open)
8. Press "alt" and go "File" from left top corner and there "New incoming connection"
9. Add someone and make sure to remember username and password then go next
10. check "Through the internet" then go next
11. Go to IPv4 properties and make sure "Network access" is checked
12. Under "IP address assignment" Check "Specifiy IP Addresses"
13. Use your Default Gateway, to create a proper IP range for "Specify IP addresses" Example: gateway is 192.168.0.1, use 192.168.0.2 to 192.168.0.10 for the ip range. Then select "OK"
14. Select "Allow access" and now we can move to our PUBG pc where we will play our games.

This is for PC where your PUBG runs.

1. For this computer also search for ncpa.cpl
2. Go to your internet adapter properties and check "Obtain an IP address automatically" and also "Obtain DNS server address automatically"
3. Uncheck IPv6 and press OK
4. Go to your "Network & Internet" settings
5. Go to "***" and from there "Add a *** connection"
6. These setting are recommended: *** Provider: Windows (build-in) Connection name: random Server name or address: This is the IPv4 address that you wrote down first *** Type: automatic User and Password as the ones you created earlier and now click save.

Now try to connect to your *** and if it succeeded you are ready to go

 

Радар старый, уже как месяц реализовали его после крупной обновы.

 

Это обновление 20.03.18
Версия 1.2.1

Если есть новее скинь